Our fleet is composed of Hopper, Hydraulic, and Mechanical dredges. In addition to the vessels displayed below, Cashman also has a wide array of split-hull hopper scows, tug boats, spud barges, deck barges, and other marine support equipment allowing us to complete virtually any job.

Dale Pyatt

  • Type: Clamshell Dredge
  • Class: ABS All Oceans
  • Dimensions: 180’ x 65’ x 12’
  • Draft: 7’
  • Environmental Bucket: 60 yd
  • Heavy Duty Bucket: 28 yd
  • Total Installed Power: 1,800 KW

The Dale Pyatt is a large class bucket dredge suitable for maintenance dredging and harbor deepening projects. The Dale Pyatt is equipped for offshore applications and contains one of the largest buckets in the Western Hemisphere

Click here to download PDF

Atchafalaya

  • Type: Trailing Suction Hopper Dredge
  • Certification: U.S. Coast Guard Unlimited Oceans
  • Class: ABS All Oceans
  • Capacity: 1,300 Yd^3
  • Length: 197’
  • Beam: 40’
  • Draft: 7’
  • Draft (loaded): 14’
  • Total Installed Power: 3,000HP

The Atchafalaya is split-hull trailing suction hopper dredge that disposes of material by bottom-dumping or pumping out through an on-board pump system. The Atchafalaya works well in harbors and inland waterways, as well as in unprotected waters. Her shallow draft and high Maneuverability, allow operation in relatively tight quarters easily. The Atchafalaya is equipped with state-of-the-art dredging production and operations monitoring instrumentation. She also uses the latest electronic positioning system.

Click here to download PDF

Captain A.J. Fournier

  • Type: Backhoe Dredge
  • Excavator: Liebherr 994
  • Class: ABS All Oceans
  • Dimensions: 165’ X 50’ X 10.5
  • Bucket Capacity: 7 – 18 yd^3
  • Digging Depth: Up to 75’

The Captain A.J. Fournier is suitable for a wide range of projects including harbor deepening, cable crossings, and maintenance dredging. Its State of the Art IHC system and GPS positioning allow for precision dredging in all conditions. The dredge works in conjunction with Cashman's fleet of 3,300 - 5,000 yd^3 split-hull hopper barges on projects involving offshore disposal.

Click here to download PDF

F.J. Belesimo

  • Type: Clamshell Dredge
  • Dimensions: 154’ x 52’ x 8.5’
  • Bucket Capacity: 12 – 30 yd^3

The F.J. Belesimo is a large class bucket dredge suitable for maintenance dredging and harbor deepening projects. The dredge works in conjunction with Cashman's fleet of 3,300 - 5,000 yd^3 split-hull hopper barges on projects involving offshore disposal.

Click here to download PDF

Wood I

  • Type: Clamshell Dredge
  • Dimensions: 135’ x 50’ x 11’
  • Bucket Capacity: 14 yd^3

The Wood I is a clamshell dredge suitable for maintenance dredging projects. The dredge works in conjunction with Cashman's fleet of 3,300 - 4,000 yd^3 split-hull hopper barges on projects involving offshore disposal.

Click here to download PDF

Drill Boat Kraken

  • Positioning System: Dual RTK System
  • Spuds: 2 Hydraulic Controlled
  • Anchor System: 6 Point Remote Control
  • Submersible Pump: Damen DOP 450mm
  • Booster Pump: 1,500 Hp GIW 20”x20”
  • Makeup Water Pump: 700Hp Godwin 24”x20”
  • Jet Water Pump: 700Hp Godwin 10”x10”
  • Pump Control Excavator: Komatsu 1250

The Hydraulic Barge Offloader Kraken can operate either as a Barge Offloader or as a Booster Barge. It can also operate as a Barge Offloader and Booster Barge simultaneously. The barge is equipped with a six point mooring system for offshore applications, and hydraulic spuds for other applications. The Kraken can work together with any mechanical dredge in our fleet as well as the TSHD Atchafalaya. With more than 4,500 total installed horsepower, the Kraken can easily offload and pump dredged material to a CDF or to a beach. The offloading pump is maneuvered by a large 120 ton Komatsu 1250.

Click here to download PDF